Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/8945
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGokdag, Istemihan-
dc.contributor.authorIzgu, Orcun-
dc.contributor.authorDagkolu, Akin-
dc.contributor.authorTanrikulu, Ahmet Alptug-
dc.contributor.authorAcar, Erdem-
dc.date.accessioned2022-11-30T19:24:49Z-
dc.date.available2022-11-30T19:24:49Z-
dc.date.issued2022-
dc.identifier.issn1615-147X-
dc.identifier.issn1615-1488-
dc.identifier.urihttps://doi.org/10.1007/s00158-022-03345-3-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/8945-
dc.description.abstractIn the aerospace industry, structures are designed (or aimed) to be as light as possible to reduce emissions and carbon footprint; additionally, they are designed to improve fuel efficiency and service life while satisfying the mechanical requirements. Due to the development of additive manufacturing technology, complex structures with higher mechanical performance obtained through topology optimization (TO) can be manufactured. In this study, the overall process from part selection to qualification for a space industry-engineering application is described. First, the design space of the selected aluminum bracket is generated, and TO is performed by using stress and minimum member size constraints. The bracket is re-designed with respect to the TO output data as a reference and then the new design is validated numerically by structural analyses. The validated design is manufactured using the selective laser melting method, and heat treatment is applied to obtain more homogenized microstructure. Mechanical tests are performed on the manufactured brackets under the qualification loading conditions and post-testing examination processes are applied with metallurgical and metrological tests. According to the test results, the qualification process of the bracket is successfully completed. Consequently, the new bracket designed with TO was found to be 25% lighter than the existing design; thus, it has a huge improvement in fuel efficiency and environmental impact during the launching phase.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK) under the Frontier R&D Laboratory Support Program [5189901]en_US
dc.description.sponsorshipThe authors acknowledge the support of Turkish Aerospace for providing test facilities. This study is a part of the project (# 5189901) supported by The Scientific and Technological Research Council of Turkey (TUBITAK) under the Frontier R&D Laboratory Support Program and performed in Turkish Aerospace Industries Inc.en_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofStructural and Multidisciplinary Optimizationen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTopology optimizationen_US
dc.subjectSatellite bracket designen_US
dc.subjectAdditive manufacturingen_US
dc.subjectOverall design processen_US
dc.subjectDesign for additive manufacturingen_US
dc.subjectStructural optimizationen_US
dc.subjectTopology Optimizationen_US
dc.subjectStructural Designen_US
dc.subjectLightweighten_US
dc.subjectComponentsen_US
dc.subjectLighten_US
dc.titleDesign Optimization and Validation for Additive Manufacturing: a Satellite Bracket Applicationen_US
dc.typeArticleen_US
dc.identifier.volume65en_US
dc.identifier.issue8en_US
dc.authoridGOKDAG, ISTEMIHAN/0000-0002-1481-5572-
dc.identifier.wosWOS:000840330000004en_US
dc.identifier.scopus2-s2.0-85136959884en_US
dc.institutionauthorAcar, Erdem-
dc.identifier.doi10.1007/s00158-022-03345-3-
dc.authorscopusid57235527400-
dc.authorscopusid57211431371-
dc.authorscopusid57235215900-
dc.authorscopusid57226327352-
dc.authorscopusid55308448100-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ1-
dc.ozel2022v3_Editen_US
item.openairetypeArticle-
item.languageiso639-1en-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

WEB OF SCIENCETM
Citations

3
checked on Aug 31, 2024

Page view(s)

152
checked on Dec 16, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.