Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/7197
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTopçu, Okan-
dc.contributor.authorÜbeyli, Mustafa-
dc.contributor.authorDemir, Teyfik-
dc.date.accessioned2021-09-11T15:55:56Z-
dc.date.available2021-09-11T15:55:56Z-
dc.date.issued2010en_US
dc.identifier.issn1073-9149-
dc.identifier.issn1525-6030-
dc.identifier.urihttps://doi.org/10.1080/10739141003594552-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/7197-
dc.description.abstractDual phase steel has become an important engineering material to be used in structural and automotive applications due to its good combination of strength, ductility, and formability. In this study, hardenability of a low carbon and microalloyed steel was investigated by using the standard Jominy End Quench Test at four different quenching temperatures. Three steel specimens were quenched from the intercritical region at 737 degrees C, 754 degrees C, and 779 degrees C separately, whereas one of them was tested at 900 degrees C, in the fully austenitic region. After finishing the Jominy test, metallographic examination of the samples was carried out to see the variation in the microstructure through the length of the steel. And also, hardness measurements were made through the length of the samples. Results brought out that there was a strong decrease in the hardness of the tested samples after a depth of 5mm from the quenched end.en_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofInstrumentation Science & Technologyen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectdual phaseen_US
dc.subjecthardenabilityen_US
dc.subjectintercritical heat treatmenten_US
dc.subjectmicroalloyed steelen_US
dc.titleOn the Hardenability of an Intercritically Heat Treated Microalloyed Steelen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume38en_US
dc.identifier.issue2en_US
dc.identifier.startpage178en_US
dc.identifier.endpage186en_US
dc.authorid0000-0002-0923-2196-
dc.authorid0000-0001-6352-8302-
dc.authorid0000-0002-7809-0283-
dc.identifier.wosWOS:000277474000006en_US
dc.identifier.scopus2-s2.0-77951199875en_US
dc.institutionauthorDemir, Teyfik-
dc.identifier.doi10.1080/10739141003594552-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ2-
item.openairetypeArticle-
item.languageiso639-1en-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

3
checked on Dec 21, 2024

WEB OF SCIENCETM
Citations

3
checked on Dec 7, 2024

Page view(s)

88
checked on Dec 16, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.