Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/6595
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTopçu, Okan-
dc.contributor.authorÜbeyli, Mustafa-
dc.contributor.authorAcır, Adem-
dc.date.accessioned2021-09-11T15:42:56Z-
dc.date.available2021-09-11T15:42:56Z-
dc.date.issued2011en_US
dc.identifier.issn1580-2949-
dc.identifier.issn1580-3414-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/6595-
dc.description.abstractDual-phase steels are attractive because of their good combination of strength and ductility. However, an increase in the martensite content will decrease the steel's machinability significantly. Therefore, optimum cutting parameters in the machining of suca materials should be determined. In this paper, the machinability of a low-alloy steel having various martensite volume fractions was investigated. The four groups of samples, three of which were intercritically annealed at three different temperatures and one of which was normalized, were used. Then, the machining experiments were carried out using a face-milling operation with two different tools. After that, the flank wear on the tools with respect to the chip-volume or flank-wear limit was determined for each case. Next, the surface roughness of the samples was measured. Finally, the wear behavior of the tools was examined with a scanning electron microscope (SEM). The experimental results indicated that the flank wear of the tools increased dramatically with the increasing martensite content of the dual-phase steels.en_US
dc.language.isoenen_US
dc.publisherInst Za Kovinske Materiale I In Tehnologieen_US
dc.relation.ispartofMateriali In Tehnologijeen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectdual phase steelen_US
dc.subjectmachinabilityen_US
dc.subjecttool wearen_US
dc.subjectmillingen_US
dc.titleEFFECT OF THE MARTENSITE VOLUME FRACTION ON THE MACHINING OF A DUAL-PHASE STEEL USING A MILLING OPERATIONen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Electrical and Electronics Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Elektrik ve Elektronik Mühendisliği Bölümütr_TR
dc.identifier.volume45en_US
dc.identifier.issue2en_US
dc.identifier.startpage145en_US
dc.identifier.endpage150en_US
dc.authorid0000-0002-0923-2196-
dc.identifier.wosWOS:000290000700011en_US
dc.identifier.scopus2-s2.0-79955132191en_US
dc.institutionauthorÜbeyli, Elif Derya-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ2-
item.openairetypeArticle-
item.languageiso639-1en-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
Appears in Collections:Elektrik ve Elektronik Mühendisliği Bölümü / Department of Electrical & Electronics Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

WEB OF SCIENCETM
Citations

1
checked on Sep 21, 2024

Page view(s)

74
checked on Dec 16, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.