Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.11851/6588
Title: | Effect of Feed Rate on Tool Wear in Milling of Al-4% Cu/B(4)C(p) Composite | Authors: | Übeyli, Mustafa Acır, Adem Karakaş, M. Serdar Öğel, Bilgehan |
Keywords: | Aluminum matrix Boron carbide Built-up-edge Coated tools Cutting speed Depth-of-cut Feed rate Flank wear Machinability Machining Metal-matrix composites Milling Powder metallurgy Sintering Wear |
Publisher: | Taylor & Francis Inc | Abstract: | The effect of feed rate on tool wear in milling of B(4)C(p) reinforced aluminum metal matrix composites (MMCs), produced by liquid phase sintering method, was investigated. Milling experiments on these composites were conducted with three different types of cementide carbide tools (uncoated, double coated (TiN+TiAlN) and triple coated (TiCN+Al(2)O(3)+TiN)) for three different feed rates of 0.15mm/z, 0.20mm/z, and 0.25mm/z. After milling experiments, an optical microscope was used to measure the magnitude of flank wear on the tools. Flank wear limit value, (V(B))=0.3mm was selected as a reference value for comparison of these tools. On the other hand, tool wear mechanisms were examined with the help of a scanning electron microscope (SEM). Experimental results indicated that higher feed rates led to lower tool wear for all type of tools and coated tools exhibited better performance than uncoated tool with respect to the flank wear. | URI: | https://doi.org/10.1080/10426910802385059 https://hdl.handle.net/20.500.11851/6588 |
ISSN: | 1042-6914 |
Appears in Collections: | Elektrik ve Elektronik Mühendisliği Bölümü / Department of Electrical & Electronics Engineering Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection |
Show full item record
CORE Recommender
SCOPUSTM
Citations
15
checked on Sep 7, 2024
WEB OF SCIENCETM
Citations
16
checked on Aug 31, 2024
Page view(s)
72
checked on Sep 9, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.