| Issue Date | Title | Author(s) |
| 2008 | A review on miniaturization of solid oxide fuel cell power sources-II: From system to material | Zhou, X. Y.; Pramuanjaroenkij, A.; Kakaç, Sadık |
| 2018 | A quest for 2D lattice materials for actuation (vol 105, pg 199, 2017) | Pronk, T. N.; Ayaş, C.; Tekoğlu, Cihan |
| 2011 | A numerical investigation of the effects of a transverse temperature gradient on the formation of regular and irregular acoustic streaming in an enclosure | Aktas, M. K.; Özgümüş, T. |
| 2012 | A NUMERICALLY EFFICIENT FREQUENCY DOMAIN METHOD FOR ANALYSIS OF NON-LINEAR MULTI DEGREE OF FREEDOM SYSTEMS | Özer, Mehmet Bülent |
| 2013 | A non-linear elastic-plastic stress analysis in a ductile double-lap joint | Sayman, Onur; Özen, Mustafa; Özel, Adnan; Demir, Teyfik ; Korkmaz, Behiye |
| 2017 | A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids | Baş, Onur; Çete, A. R.; Mengi, S.; Tuncer, İsmail H.; Kaynak, Ünver |
| 2020 | A Novel Artificial Pancreas: Energy Efficient Valveless Piezoelectric Actuated Closed-Loop Insulin Pump for T1DM | Kaçar, Alp; Özer, Mehmet Bülent ; Taşcıoğlu, Yiğit |
| 2011 | A micro-damage investigation on a low-alloy steel tested using a 7.62-mm AP projectile | Demir, Teyfik ; Übeyli, Mustafa |
| 2014 | A Mach-uniform preconditioner for incompressible and subsonic flows | Baş, Onur; Tuncer, İsmail H.; Kaynak, Ünver |
| 2018 | A correlation-based algebraic transition model | Çakmakcıoğlu, Samet Caka; Baş, Onur; Kaynak, Ünver |
| 2021 | A crystal plasticity based finite element framework for RVE calculations of two-phase materials: Void nucleation in dual-phase steels | Yalçınkaya, Tuncay; Çakmak, Serhat Onur; Tekoğlu, Cihan |
| 2009 | A comparative study of design optimisation methodologies for side-impact crashworthiness, using injury-based versus energy-based criterion (vol 14, pg 125, 2009) | Horstemeyer, M. F.; Ren, X. C.; Fang, H.; Acar, Erdem ; Wang, P. T. |
| 2013 | 33 Numerical Study of Turbulence Nanofluid Flow to Distinguish Models for In-House Programming | Tongkratoke, Amarin; Pramuanjaroenkij, Anchasa; Chaengbamrung, Apichart; Kakaç, Sadık |
| 2014 | 2-D and 3-D CFD Investigation of NREL S826 Airfoil at Low Reynolds Numbers | Çakmakcıoğlu, S. C.; Sert, İ. O.; Tuğluk, O.; Sezer, Uzol, N. |
| 2017 | Utilization of numerical methods and experiments for the design and tests of gasketed plate heat exchangers | Aradağ S.; Kakaç, Sadık ; Özkaya E. |
| 2015 | URANS and les CFD simulations of swirl stabilized non-premixed TECFLAM combustor | Solmaz, M. B.; Uslu, S. |
| 2014 | Unsteady RANS for simulation of high swirling non-premixed methane-air flame | Solmaz, M. B.; Uslu, S. ; Uzol, O. |
| 2013 | Uniaxial mechanical response of polycrystalline shape memory alloys | Babacan, Nazım; Özsoy, İstemi Barış |
| 2009 | Unsteady navier stokes solutions of low aspect ratio rectangular flat wings in compressible Flow | Durmuş, G.; Kavsaoğlu, M. Ş.; Kaynak, Ünver |
| 2012 | Transition at low-re numbers for UAV type airfoils at high subsonic mach numbers | Çakmakçıoğlu, Samet Çaka; Kaynak, Ünver ; Genç, M. S. |
