Issue Date | Title | Author(s) |
2022 | Design optimization of armored wheeled vehicle suspension lower control arm | Demli, Ugur Ozhan; Acar, Erdem |
2024 | Design optimization of bellow joints used in liquid propellant rocket engines | Acar, Erdem ; Öztürkler, Oğulcan |
2014 | Design Study of a Short-Range Airborne UAV Radar for Human Monitoring | Gürbüz, Sevgi Zübeyde; Kaynak, Ünver ; Özkan, Bertan; Kocaman, Ozan Can; Kıyıcı, Firat; Tekeli, Burkam |
2021 | Determining geometric bounds used in lattice structure design and optimization based on additive manufacturing constraints | Görgülüarslan, Recep Muhammet |
2022 | Development of a method for maximum structural response prediction of a store externally carried by a jet fighter | Kaplan, E. M.; Acar, Erdem ; Özer, M. Bülent |
2018 | Development of a pressure based, unstructured, GPU accelerated CFD solver for compressible reacting flows at all MACH numbers | Özkan, B.; Uslu, S. |
Jul-2017 | Development Of The Science Of Thermodynamics | Kakaç, Sadık |
2010 | Direct and Inverse Problems Solutions in Micro-Scale Forced Convection | Naveira-Cotta, C. P.; Cotta, R. M.; Orlande, H. R. B.; Kakaç, Sadık |
Apr-2017 | Drop test simulation and surrogate-based optimization of a dishwasher mechanical structure and its packaging module | Mulkoğlu, O.; Güler, Mehmet Ali ; Acar, Erdem ; Demirbag, H. |
2022 | Ductile failure predictions using micromechanically-based computational models | Dæhli L.E.B.; Tekoğlu, Cihan ; Morin D.; Børvik T.; Hopperstad O.S. |
2023 | Ductile tearing of aluminium plates: experiments and modelling | Espeseth, Vetle; Morin, David; Tekoğlu, Cihan ; Borvik, Tore; Hopperstad, Odd Sture |
2015 | Dynamic Modeling of a Multiple Launch Rocket System | Sert, Serdar; Taşcıoğlu, Yiğit |
2012 | An eco-improvement methodology for reduction of product embodied energy in discrete manufacturing | Ünver, Hakkı Özgür ; Uluer, M. U.; Altın, A.; Taşcıoğlu, Y.; Kihç, S. E. |
2020 | Editorial for the Special Issue: Computer-Aided Manufacturing and Design | Zhou, Qi; Choi, Seung-Kyum; Görgülüarslan, Recep Muhammet |
2019 | Effect of damage-related microstructural parameters on plate tearing at steady state | Tekoğlu, Cihan ; Nielsen, K. L. |
1-Apr-2015 | Effect of error metrics on optimum weight factor selection for ensemble of metamodels | Acar, Erdem |
Jun-2020 | Effect of free-play and initial conditions on aeroelastic behavior of a missile canard in supersonic flow | Özçatalbaş, Mustafa; Acar, B.; Uslu, Sıtkı |
2010 | The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading | Güler, Mehmet Ali ; Cerit, Muhammed E.; Bayram, Bertan; Gerçeker, Bora; Karakaya, Emrah |
2013 | The effect of heat treatment on the properties of astaloy Cra powder alloys | Hafızoğlu, Hakan; Durlu, N. |
2013 | The effect of heat treatment on the properties of astaloy Mo and distaloy Dh powder alloys | Öge, Ahmet Murat; Durlu, N. |
Sep-2017 | Effect of hole reinforcement on the buckling behaviour of thin-walled beams subjected to combined loading | Örün, Arif E.; Güler, Mehmet Ali |
2021 | Effect of left atrial ligation-driven altered inflow hemodynamics on embryonic heart development: clues for prenatal progression of hypoplastic left heart syndrome | Salman, Hüseyin Enes ; Alser, Maha; Shekhar, Akshay; Gould, Russell A.; Benslimane, Fatiha M.; Butcher, Jonathan T.; Yalçın, Hüseyin C. |
Jan-2014 | The effect of material property grading on the rolling contact stress field | Alinia, Y.; Güler, Mehmet Ali ; Adibnazari, S. |
2017 | The effect of percent foam fill ratio on the energy absorption capacity of axially compressed thin-walled multi-cell square and circular tubes | Altın, Murat; Güler, Mehmet Ali ; Mert, Sinem K. |
2020 | Effect of powder characteristics and compaction pressure on the mechanical properties of alumina | Karaltı, O.; Cerit, M.; Durlu, N. |
2016 | Effect of radiation on gas turbine combustor liner temperature with conjugate heat transfer (CHT) methodology | Saygın, Y.; Kocaman, O. C.; Uslu, S. |
4-Jul-2018 | Effect of sintering temperature on the high strain rate-deformation of tungsten heavy alloys | Hafızoğlu, Hakan; Durlu, Nuri |
2021 | Effect of sphere radius and bullet hitting location on the ballistic performance of alumina ceramic tile | Çelikbas D.; Acar, Erdem |
2019 | Effect of surface roughness on tensile properties of electron beam melted Ti-6Al-4V alloy | Memu, Fırat; Hamat, B. A.; Güleç, Y.; Durlu, N. |
Jan-2014 | Effect of swaging on microstructure and tensile properties of W-Ni-Fe alloys | Durlu, Nuri ; Çalışkan, N. Kaan; Bor, Şakir |
2022 | Effect Of The MQL Technique On Cutting Force And Surface Quality During The Slot Milling Of Titanium Alloy | Osman, Khaled Ali; Yilmaz, Volkan; Ünver, Hakkı Özgür ; Seker, Ulvi; Kilic, S. Engin |
2012 | Effect of thickness on the film properties of spray deposited copper indium sulfide thin films by ultrasonic impact nozzle | Aydın, E.; Sankır N. D.; Ünver H. ; Uluer E. |
2011 | Effect of variable thermal conductivity and viscosity on single phase convective heat transfer in slip flow | Kakaç, Sadık ; Yazıcıoğlu, Almila G.; Gözükara, Arif Cem |
2010 | The effects of acoustic streaming on thermal convection in an enclosure with differentially heated horizontal walls | Aktaş, Murat Kadri ; Ozgümüş, Türküler |
2023 | Effects of process parameters on strengthening mechanisms of additively manufactured AlSi10Mg | Gökdağ, İstemihan; Acar, Erdem |
2020 | Effects of pulsating flow on convection in wavy channels with phase shift | Angeneh, Saeid Raheimpour; Başer, O.; Aktaş, Murat Kadri |
Jun-2019 | Effects of sintering temperature and Ni/Fe ratio on ballistic performance of tungsten heavy alloy fragments | Hafızoğlu, Hakan; Durlu, Nuri ; Konokman, Hüseyin Emrah |
2010 | Effects of Structural Tests on Aircraft Safety [Article] | Acar, Erdem ; Haftka, Raphael T.; Kim, Nam H. |
2009 | Effects of structural tests on aircraft safety [Conference Object] | Acar, Erdem ; Haftka, R. T.; Kim, N. H.; Buchi, D. |
Nov-2013 | Effects of the correlation model, the trend model, and the number of training points on the accuracy of Kriging metamodels | Acar, Erdem |
2023 | Effects of turbulence and flamelet combustion modelling on the CFD simulation of a dual inlet ramjet combustor | Solmaz, Mehmet Burak; Uslu, Sıtkı |
2021 | Eklemeli İmalat ile Üretilen Latis Yapılardaki Geometrik Değişimlerin Konuma Bağlı İstatistiksel Modellenmesi | Görgülüarslan, Recep Muhammet ; Utku Güngör, Olgun |
2014 | Electro-Mechanical Control Loading System For Rotary Wing Aircraft Simulators | Aygün, Mehmet Murat; Taşcıoğlu, Yiğit ; Genç, Gürsoy; Altunay, Mustafa |
2021 | Energy absorption behavior of stiffness optimized graded lattice structures fabricated by material extrusion | Görgülüarslan, Recep Muhammet ; Güngör, O. Utku; Yıldız, Saltuk; Erem, Erdem |
Jul-2017 | Energy consumption characteristics of turn-mill machining | Moradnazhad, Mariyeh; Ünver, Hakkı Özgür |
Sep-2017 | Energy efficiency of machining operations: A review | Moradnazhad, Mariyeh; Ünver, Hakkı Özgür |
Oct-2019 | An engineering flight simulator for control loading system development | Taşcıoğlu, Yiğit ; Aygün, Mehmet Murat |
2010 | Enhanced thermal conductivity of nanofluids: a state-of-the-art review | Özerinç, Sezer; Kakaç, Sadık ; Yazıcıoğlu, Almila Güvenç |
Dec-2017 | Enhancement of quality of modal test results of an unmanned aerial vehicle wing by implementing a multi-objective genetic algorithm optimization | Pedramasl, Nima; Şahin, Melin; Acar, Erdem |
2017 | Estimation of parameters for the free-form machining with deep neural network | Serin, Gökberk; Güdelek, M. Uğur; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
2021 | Evaluation Of Differences Between FEA Predictions With Geometric Variations And Tensile Tests Of Strut Specimens Of Lattice Structures Fabricated By Material Extrusion | Görgülüarslan, Recep Muhammet ; Gungor O.U.; Karabiyik H. |
2015 | Evaluation of partner companies based on fuzzy inference system for establishing virtual enterprise consortium | Nikghadam, Shahrzad; Sadigh, Bahram Lotfi; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür ; Kılıç, Sadık Engin |
2019 | Evaluation of various multi-cell design concepts for crashworthiness design of thin-walled aluminum tubes | Acar, Erdem; Altın, Murat; Güler, Mehmet Ali |
2022 | An Evaluation Study of EMD, EEMD, and VMD For Chatter Detection in Milling | Seyrek, Pelin; Sener, Batihan; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
2016 | Evolution Of The Science Of Thermodynamics: The History | Kakaç, Sadık |
2016 | Exergy analysis of an air-blasted combustor: an application for atmospheric test rig condition | Topal, Ahmet; Turan, Önder; Uslu, Sıtkı ; Söğüt, M. Ziya |
2014 | Exit temperature profile measurement and CFD comparisons on small scale turbojet combustor with air blast atomizer configuration | Çatori, C.; Topal, A.; Uslu, S. ; Tuncer, O.; Çağan, L.; Özkan, S. A.; Çelik, E. |
Nov-2016 | Experimental analysis of a mixed-plate gasketed plate heat exchanger and artificial neural net estimations of the performance as an alternative to classical correlations | Türk, Caner; Aradağ, Selin; Kakaç, Sadık |
2016 | Experimental Analysis of Laminar Flow and Heat Transfer in a Multi-Port Finned Minichannel | Çevrim, Berk; Güvenç Yazıcıoğlu, Almıla; Kakaç, Sadık |
2008 | An experimental and computational study of low Re number transitional flows over an aerofoil with leading edge slat | Genç, M. Serdar; Lock, G.; Kaynak, Ünver |
2018 | Experimental and numerical investigation of stress concentration and strength prediction of carbon/epoxy composites | Özaslan, Emre; Acar, Bülent; Güler, Mehmet Ali |
2021 | Experimental and numerical investigation of the cylinder-dome transition region of a pressure vessel | Özaslan, E.; İncecik, B. B.; Yetgin, A.; Acar, Bülent; Güngör, S.; Sapancı, E.; Güler, Mehmet Ali |
2021 | Experimental and numerical investigation on the crashworthiness optimization of thin-walled aluminum tubes considering damage criteria | Mert, Sinem K.; Demiral, Murat; Altın, Murat; Acar, Erdem ; Güler, Mehmet Ali |
Nov-2020 | Experimental and numerical study on the crashworthiness evaluation of an intercity coach under frontal impact conditions | Güler, Mehmet Ali ; Cerit, Muhammed Emin; Mert, Sinem Kocaoğlan; Acar, Erdem |
Dec-2020 | Experimental characterization of spatial variability for random field modeling on struts of additively manufactured lattice structures | Güngör, O. Utku; Görgülüarslan, Recep Muhammet |
Jan-2014 | Experimental comparison of performances of three different plates for gasketed plate heat exchangers [Article] | Gülenoğlu, Çağın; Aktürk, Fatih; Aradağ, Selin; Uzol, Nilay Sezer; Kakaç, Sadık |
2012 | Experimental comparison of performances of three different plates for gasketed plate heat exchangers [Conference Object] | Gülenoğlu, Çağın; Aktürk F.; Aradağ S.; Uzol, N. S.; Kakaç, Sadık |
2015 | Experimental Determination of Cavitation Characteristics of Hydraulic Turbines | Demirel, Gizem; Aylı, Ece; Çelebioğlu, Kutay ; Taşcıoğlu, Yiğit ; Aradağ, Selin |
2015 | Experimental Investigation And Performance Analysis Of Gasketed-Plate Heat Exchangers | Aktürk, Fatih; Sezer-Uzol, Nilay; Aradağ, Selin; Kakaç, Sadık |
2018 | The experimental investigation of a double pipe heat exchanger installed inside a split-type air-conditioning system | Pramuanjaroenkij, Anchasa; Phankhoksoong, Siriluk; Tongkratoke, Amarin; Kakaç, Sadık |
Jan-2020 | Experimental Investigation of Crack Propagation Mechanisms in Commercially Pure Aluminium Plates | Tekoğlu, Cihan ; Çelik, Ş.; Duran, Hatice ; Efe, M.; Neilsen, K. L. |
2019 | The Experimental Investigation of Double Pipe Heat Exchangers Prepared from Two Techniques | Tongkratoke, Amarin; Pramuanjaroenkij, Anchasa; Phankhoksoong, Siriluk; Kakaç, Sadık |
2010 | Experimental investigation of heat transfer and pressure drop for two-phase R134a flow in a 1.65 mm copper tube | Tekin, B.; Kerpiççi, H.; Yazıcıoğlu, Almila Güvenç; Kakaç, S. |
2015 | Experimental Investigation Of Oscillation Controlled Heat Transport Tubes | Güler, Ömer Faruk; Aktaş, Murat Kadri |
2016 | Experimental Investigation Of Oscillation Controlled Thermal Transport In Water-Based Nanofluids | Güven, Oğuz; Aktaş, Murat Kadri ; Bayazitoğlu, Yıldız |
23-Aug-2018 | Experimental investigation of spray dehumidification process in moist air | Gümrük, Semra; Aktaş, Murat Kadri ; Kasap, Fatih |
Dec-2016 | Experimental investigation of surface roughness effects on the flow boiling of R134a in microchannels | Jafari, Rahim; Özyurt, Tuba Okutucu; Ünver, Hakkı Özgür ; Bayer, Özgür |
2019 | Experimental Investigation of Thermal and Hydraulic Performance of a Plate Heat Exchanger Using Nanofluids | Kayabaşı, Ufuk; Kakaç, Sadık ; Aradağ, Selin; Pramuanjaroenkij, Anchasa |
2011 | Experimental robust optimal machining of hardened AISI 420 stainless steel with Al2O3+TiCN mixed ceramic tool | Acar, Erdem ; Camuşcu, N.; Er, A. O.; Aslan, E. |
2015 | Experimental Study of Direct Contact Condensation of Steam on Water Droplets | Gümrük, Semra; Aktaş, Murat Kadri |
2023 | Exploring Design Options for Wing Leading Edge Against Bird Strike | Cihan Tezel, Muhammed; Yamaner, Yusuf; Aziz Çoğuz, Bilge; Acar, Erdem |
2022 | Exploring the Potential of Transfer Learning for Chatter Detection | Ünver, Hakkı Özgür ; Sener, Batihan |
2021 | Exploring various options for improving crashworthiness performance of rail vehicle crash absorbers with diaphragms | Keskin, S.A.; Acar, Erdem ; Güler, Mehmet Ali ; Altın, M. |
2020 | Failure Prediction of Composite Open Hole Tensile Test Specimens Using Bond Based Peridynamic Theory | Baykan, Büşra M.; Yolum, Uğur; Özaslan, Emre; Güler, Mehmet Ali ; Yıldırım, Bora |
2014 | FINITE ELEMENT MODELING OF MICRO-PARTICLE SEPARATION USING ULTRASONIC STANDING WAVES | Büyükkoçak, Süleyman; Çetin, Barbaros; Özer, Mehmet Bülent |
2016 | Finite element simulations of microstructure evolution in stress-induced martensitic transformations | Özsoy, İstemi Barış ; Babacan, Nazım |
2009 | Flow over an aerofoil without and with a leading-edge slat at a transitional Reynolds number | Genç, M. Serdar; Kaynak, Ünver ; Lock, G. D. |
2021 | Fluid Flow Characteristics of Healthy and Calcified Aortic Valves Using Three-Dimensional Lagrangian Coherent Structures Analysis | Mutlu, Onur; Salman, Hüseyin Enes ; Yalçın, Hüseyin Çağatay; Olcay, Ali Bahadır |
2008 | Fluid flow in microtubes with axial conduction including rarefaction and viscous dissipation | Çetin, Barbaros; Yazıcıoğlu, Almila Güvenç; Kakaç, Sadık |
17-Jul-2018 | Foam filling options for crashworthiness optimization of thin-walled multi-tubular circular columns | Acar, Erdem ; Güler, Mehmet Ali ; Altın, Murat |
2010 | Fonksiyonel derecelendirilmiş kaplamalarda sürtünmeli rijit zımba etkisiyle oluşan yüzeyaltı temas gerilmeleri | Apatay, Tunç; Dağ, Serkan; Güler, Mehmet Ali ; Gülgeç, Müfit |
2021 | Frequency Containment Control of Hydropower Plants Using Different Adaptive Methods | Gezer, Doğan; Taşcıoğlu, Yiğit ; Çelebioğlu, Kutay |
2016 | The frictional contact problem of a rigid stamp sliding over a graded medium | Güler, Mehmet Ali ; Öztürk M.; Küçüksucu, A. |
Feb-2008 | The frictional contact problem of sliding rigid parabolic stamps on graded materials | Güler, Mehmet Ali ; Erdoğan, Fazıl; Dağ, Serkan |
2013 | Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp | Dağ, Serkan; Güler, Mehmet Ali ; Yıldırım, Bora; Özatağ, A. Cihan |
Dec-2014 | A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate | El-Borgi, Sami; Usman, Shameem; Güler, Mehmet Ali |
3-Apr-2018 | Frictional receding contact problem for a graded bilayer system indented by a rigid punch | Yılmaz, K. B.; Çömez, I.; Yıldırım, B.; Güler, Mehmet Ali ; El-Borgi, Sami |
2007 | The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings | Güler, Mehmet Ali ; Erdoğan, Fazıl |
2023 | The fuel cell electric vehicles: The highlight review | Pramuanjaroenkij, Anchasa; Kakaç, Sadık |
2011 | Guided tail modelling for efficient and accurate reliability estimation of highly safe mechanical systems | Acar, Erdem |